Introduction:

From our Hurricane, designed to maximize protection for micro cables with a compliant double drive concept, to our Accelair 2, designed to suit the smaller end of the fiber range, our fiber optic blowing machines were built to go the distance. 

Hurricane:

One of the newest in our line of cable blowing machines, the Hurricane Cable Blowing Machine, provides precise control of torque and speed along with easy-to-operate ergonomic controls, making it single-operation safe. The Hurricane is also equipped with an advanced data logging system measuring speed, force, distance, GPS location and environmental conditions. To learn more about this specific blowing machine, make sure to check out our recent blog post here.

Other Blowing Machines:

Besides the Hurricane, we have a wide range of fiber optic blowing machines designed to help YOU get the job done. Learn more about the features of these great tools and sizing options in the chart below:

Machine NameMain FeaturesSpecificationsOrdering Information
TornadoInstalls fiber optic cable into pre-installed innerduct or direct buried innerduct.
Pushing Force: 0-220 lbs. (0-100kg)
Pushing Speed: 0-300 ft/min (0-90m/min)
Cable Size: .24-1.34″ (6-34mm) O.D.
Sub – Duct Size: 1/2-2 1/2″ SDR (12-63mm) O.D.
Also available as the “Tornado Plus” and “Tornado Max”
JetStreamDesigned to provide maximum cable protection, combined with the performance and reliability of hydraulic drive.Cable Diameter: .16-79 in. (4-20 mm)
Duct Size (Outside Dia): .75 – 1.50 in. SDR (10-50 mm OD)
Cable Speed (Adjustable): 0-280 ft/min (0-85m/min)
Air Pressure: 215 psi (15 bar) 450 cfm (12 m3/min)
Width: 19 in. (484 mm)
Length: 24.5 in. (620 mm)Height: 9.2 in. (233 mm)
Also available as the “JetStream Cable Blowing Machine Plus”
Air StreamDesigned to maximize protection for micro cables with a compliant double drive concept. Also backed by the latest technology in servo controls to provide precise control of torque and speed.Cable Diameter: 2.5 to 11mm
Tube Size (Outside Dia): 5 to 18mm
Cable Speed (Adjustable): 0-260 ft/min (0-80m/min)
Air Pressure: 145-215 psi (10-15 Bar)
Power Requirement: 110/220 Volt AC
Width: 11.8 in. (300mm)
Length: 18 in. (460mm)
Height: 10.6 in. (270mm)
Also available as the “Air Stream Cable Blowing Machine Plus”
WhisperInstalls microcables using compressed air. The rollers, powered by most types of cordless drills, control the microfiber as it is propelled into the microduct. Cable Diameter: 3 to 8.5mm and various manufacturers flat drop
Tube Size (Outside Dia): 4 to 18mm
Cable Speed (Adjustable): 0-300 ft/min (0-90m/min)
Max Air Pressure: 220 psi (15 Bar)
Max Air Pressure: 220 psi (15 Bar)
Width: 8.1 in. (206mm)
Length: 9.7 in. (246mm)
Height: 8.5 in. (216mm)
Weight: Approx. 12 lbs (5.4Kgs Approx.)
Also available as the “Whisper Cable Blowing Machine Plus,” “Whisper Micro Cable Blowing Machine for Flat Drop Fiber Optic Cable,” and “Whisper Micro Cable Blowing Machine PLUS for Flat Drop Fiber Optic Cable”
GentleAir for Blown FiberCoupled with the driven roller and a precision clutch where you can dial in your custom torque, the Gentle Air uses compressed air to install fiber.Cable Diameter: 0.039″ to 0.118″ (1.0 to 3.0mm)
Tube Size (Outside Dia): (OD) 0.158″ to 0.275″ (4 to 7mm)
Cable Speed (Adjustable): 0-300 ft/min (0-90m/min)
Max Air Pressure: 220 psi (15 Bar)
Power Requirement: Variable Speed Drill
Width: 8.1 in. (206mm)
Length: 9.7 in. (246mm)
Height: 8.5 in. (216mm)
Weight: Approx. (5.4Kgs Approx.)
Also available as the “GentleAir Plus Blown Fiber Machine”
Accelair2Designed to suit the smaller end of fiber range, the AccelAir 2 completes the range of Tornado, JetSteam, Hurricane, AirStream, Whisper, and Microdrive blowing installation systems all from one company.Cable Diameter: .8 to 3 mm
Tube Size (Outside Dia): 3 to 10mm
Cable Speed (Adjustable):0-328 ft/min (0-100m/min) without buckle detection 0-164 ft/min (0-50 m/min) with buckle detection
Max Air Pressure: 220 psi (15 Bar) 8.5 cfm (.24 m/min)
Power Requirement:120/220v power supply or optional 24v battery pack
Width:7.2 in. (184 mm)
Length: 6.5 in. (166 mm)
Height: 8.5 in. (216mm)
Weight: 6.6 lbs (3 kgs)
Also available as the “Accelair 2 Cable Blowing Machine PLUS”
MicroDrive Cable BlowerBuilt with simplicity and reliability in mind, the MicroDrive is driven by an off-the-shelf battery-powered drill and a precision clutch where you can dial in custom torque settings.Cable Diameter: 2.1-6.0mm
Tube Size (Outside Dia):(OD) 7.0, 8.0, 8.5, 10.0, 12.0, 12.7, 14.0mm
Cable Speed (Adjustable): 0-300 ft/min (0-90 m/min)
Max Air Pressure:220 psi. (15 bar)
Power Requirement: Variable Speed Drill with adjustable torque
Width: 9.7 in. (248mm)
Length: 5.6 in. (143mm)
Height: 6.6 in. (169mm)
Weight: Approx. 6 lbs (3.1Kgs Approx.)
Order includes (2) 9V Lithium Batteries, Cable Seals and Drive Wheels, Tube Clamps and Seals, Toolkit, Heavy duty storage case, and Quick Start Guide

Conclusion:

Looking for more information on any of these blowing machines? See how we can help by sharing your comments and inquiries here.